Meridian OFI Engine v2.2 layers cumulative volume delta, absorption, imbalance, and stacked imbalance — the last read from TradingView's native diagonal footprint — onto the regime-aware lattice: the same SMC/VWAP/magnet levels, now read through order flow — feeding the liquidity memory map and path-integrity tracking, so every signal carries a grade, a regime, and a managed trade from entry to TP3.
Meridian OFI never takes a trade off one signal. Three gates must clear in order — a regime-aware bias, a liquidity arm, and an untapped zone retest — before the engine commits a managed path from entry to TP3.
The engine classifies every bar TREND, RANGE, or TRANSITION. In TREND it trades only with the ribbon and cloud; in RANGE it fades premium and discount extremes; in TRANSITION it demands a denser lattice before anything fires.
A setup only arms on a confirmed liquidity sweep, a volume-backed VWAP reclaim, or a bullish/bearish CHoCH. The arm expires after a preset number of bars — stale setups are dropped automatically.
Price must tap an untapped FVG (or order block) while the event lattice reads at least your minimum grade. No-chase blocks stretched entries in TREND; RANGE gets a fade-into-extremes exception.
On entry, Meridian OFI plots a structural stop and three targets. PATH CONFIRM fires when TP1 is touched; PATH BREAK fires if price closes beyond the stop first. One path per direction, tracked live.
Mutual exclusion built in. If both long and short fire on the same bar, Meridian OFI keeps the higher-density side — or stands aside entirely on a tie. It will not hand you a conflicting pair.
Each pillar replaces a flat rule with a dynamic read — regime context, a decaying memory of liquidity, clustered evidence, and a tracked trade path.
Every bar is classified TREND, RANGE, or TRANSITION from ATR relative strength, a manual ADX(14), and EMA ribbon 9/21/50 alignment. Bias, risk-reward, and no-chase logic all shift with the regime.
Confirmed sweeps push liquidity pools into a rolling memory — each with a price, direction, intensity, and a decaying magnet. Revisit with volume and the magnet strengthens; TP3 can target the opposing pool.
Not a flat score. Sweeps, CHoCH, BOS, VWAP reclaims, band touches, session tags, absorption, imbalance, and stacked imbalance land in a rolling lattice. Density is measured in time and price — each of the ten event types counted once — then graded WATCH to SINGULAR.
Entry at the close, a structural stop beyond the sweep or zone invalidation, and three targets: TP1 at VWAP or the nearest sigma band, TP2 by risk × RR, and TP3 at the opposing magnet or 1.5× TP2.
On every signal Meridian OFI stores the entry, stop, and targets, then follows the trade. TP1 touched first is a PATH CONFIRM; price closing beyond the stop first is a PATH BREAK. Both print labels and fire alerts.
America/New_York windows — Asia, London, the NY killzone, and a configurable Silver Bullet — act as amplifiers, not mandatory AND-gates. A setup in-window gets a lattice density boost, never a forced wait.
The OFI layer reads cumulative volume delta and projects it onto the same SMC/VWAP/magnet levels the engine already tracks. Absorption (type 8) and imbalance (type 9) join the lattice as direction-aware events — and v2.2 adds stacked imbalance (type 10), read from TradingView's native diagonal footprint. All three feed straight into density → grade → Gate 3 with no new gates.
Every bar's volume is split up/down by close vs. prior close — robust on feeds without true bid-ask — then accumulated into a running CVD. A 3-bar slope sets the rising/falling state; session high and low are tracked live.
Large opposing volume that fails to continue — price stalls or rejects at an FVG/order block, a magnet, or a VWAP band. A bullish close on heavy selling delta marks demand absorbing supply; a bearish close on heavy buying delta marks supply absorbing demand.
Aggressive continuation — a strong delta bar with rising/falling CVD plus a BOS/CHoCH, VWAP reclaim, or zone tap. It flags the side with conviction momentum, not just a level reaction.
request.footprint() reads true bid/ask at every price row. A buy imbalance flags when a row's buy volume ≥ threshold% of the sell volume of the row below it (diagonal, 3:1 default); a sell imbalance mirrors it above. Three or more consecutive same-side rows form a stacked zone — the strongest initiative read in the lattice, pushed as type 10 and optionally registered as a high-intensity magnet.
No new gates. Absorption, imbalance, and stacked imbalance raise density at the levels you already trade. A stacked run that aligns with the lattice gets a small extra grade nudge — the existing gradeOK and mutual-exclusion logic consume all of it automatically.
Honest data source. Stacked imbalance prefers TradingView's native request.footprint() (Premium/Ultimate). When footprint data is unavailable, the engine falls back to a multi-bar CVD proxy — coarser, not diagonal. The dashboard tags every read ·FP (native) or ·px (proxy).
The lattice counts how many of the ten event types cluster near price — structure, VWAP, session, and now order-flow absorption, imbalance, and stacked imbalance — then grades the setup. Session windows amplify, and a high-magnet pool in range can push a setup to the top.
Five or more distinct event types clustered in time and price — with a high-magnet pool in range. The rarest, highest-conviction read. Maximum size and RR.
Four event types in the lattice — sweep, structure, VWAP, and session alignment converging at one level. Full position size.
The standard smart-money stack — a sweep, a structure shift, and a fresh imbalance. Standard position size.
Core confirmation only. Valid for research and tracking — raise the minimum grade to PRIME before taking live size.
Each institutional session tags the lattice for a density boost. Unlike rigid AND-gates, a setup never has to wait for the "right" window — it simply scores higher inside one.
A sweep of the prior London high or low inside the Silver Bullet window, tagged for a lattice boost. A clean reversal read.
A volume-spike test of the prior New York extreme with trend alignment — institutional defense of a session high or low.
The London session's range and liquidity form the reference for the Silver Bullet sweep later in the morning.
A break of the prior Asia range after it closes, with structure alignment — the earliest read on the day's directional intent.
Meridian OFI isn't a reskin — it's a synthesis that keeps what both engines do well and replaces their flat scoring with a regime-aware lattice, a liquidity memory map, and path tracking.
| Capability | Pro v3 | USME v2 | Meridian OFI |
|---|---|---|---|
| 3-gate bias → arm → zone | ✓ Yes | No — flat AND | ✦ Regime-aware |
| True VWAP σ bands (vPV2) | ✓ Yes | ✓ Yes | ✦ + anchors |
| No-chase / band confluence | ✓ Yes | ◐ Partial | ✦ + RANGE fade |
| BOS / CHoCH | — No | ✓ AND gates | ✦ Lattice & arm |
| Conviction grading | — No | ◐ Flat score | ✦ Lattice → SINGULAR |
| Session SB / NYDef / Asia | — No | ◐ AND-heavy | ✦ Amplifier tags |
| Liquidity memory | — No | — No | ✦ Signature |
| Path integrity | — No | — No | ✦ Yes |
| Structural SL + TP1–3 | ◐ ATR only | Labels only | ✦ Dynamic geometry |
| Regime engine | — No | — No | ✦ TREND / RANGE / TRANSITION |
| Order flow (CVD / Abs / Imb / Stack) | — No | — No | ✦ OFI + native footprint |
Nothing is left to interpretation. Each bubble, arrow, and path marker has a fixed meaning and a matching alert.
Bar-close only. Entry signals confirm on a closed bar — no mid-candle signal that can vanish before the close. Arm bubbles and stage indicators update live by design, but they are state reads, never trade triggers.
Add the script, let the Auto preset derive your timeframe, and trade the read — regime, then arm, then zone.
Paste the Meridian OFI Engine Pine Script v6 into the TradingView Pine editor, save, and add it to your chart.
Auto derives Scalp, Intraday, Swing, or Position from your chart timeframe — so stop, RR, and lattice sensitivity match the timeframe you're actually trading.
PRIME filters out weak lattices for live trading. Keep WATCH for research, and let ELITE and SINGULAR surface your highest-conviction reads.
Enter only when the dashboard shows Armed + a matching Lattice grade + an aligned Regime and Bias. Then manage via Path Confirm and Break.
Create alerts from the script's alertconditions — BUY/SELL, sweep arm, ELITE/SINGULAR, Path Break/Confirm, regime change, and bias flip.
Read the regime, read the order flow, and follow the liquidity — every signal carries a grade and a tracked path from entry to TP3. Built for TradingView Pine Script v6.